Telehandler 6.26 Full Electric

2600 kg of maximum capacity, up to a height of 5.9 m

The Faresin Industries R&D centre, after years of research, has developed this innovative machine on the same chassis as the telescopic handler 6.26. The fact that it has zero CO2 emissions allows for it to be used even in closed environments, such as warehouses, logistics areas and agricultural activities, improving the level of comfort and safety in the workplace. The low noise level allows for it to be used in workplaces and environments where the use of combustion engines is not recommended. 
These technical solutions are perfectly in line with new green technology which provides for a reduced impact on the environment in the future. The telescopic handler Full Electric 6.26 can be used in any operating condition thanks to its practicality and its all-wheel drive.


  • Battery life 6 hours
  • Recharge: on board 7,5 hours / fast 3 hours
  • Reduced noise
  • Green technology
  • 0 emissions
  • 100% electric
* All images are included for illustrative purposes

Request Infomation

elettrico 1.png
Thanks to its services and electric drive unit,
the CO2 emissions can be considered zero.
Simple and cheap maintenance like that of an electric motor.
The same performance as a conventional telescopic handler mod. 6.26 without the noise of a combustion engine.
Use Fast charging and reduce the recharge time during the work cycle. Use classic charging at night. Standard on-board charger placed inside the machine.
elettrico 2.png
The Faresin electric telescopic handler is suitable for any type of application where the use of a combustion engine would be limited.
  • Historical centres
  • Logistics
  • Indoors (Fairs, events)
  • Rental
  • Farming
  • Greenhouses and nurseries
  • Organic agriculture
  • IV Range


Schermata 2019-04-09 alle 15.20.07.png
The increased purchase investment is amortised on average after about 2 years of work.

Available configurations


  • Weight 4800 kg
  • Transmission electric
  • Hydraulic supply gear pump
  • Flow rate of hydraulic services 80 l/min @ 230 bar
  • Steering radius 3,25 m
  • No. of extending sections 1
  • Speed 12 km/h
  • Wheels 12-16,5

Data & technical specifications

  • Height 1935 mm
  • Width 1890 mm
  • Gauge 1550 mm
  • Clearance from ground 220 mm
  • Pitch 2525 mm
  • Length 4035 mm
  • Cab width 960 mm
  • Maximum capacity 2600 kg
  • Lifting height 5,9 m
  • Horizontal boom extension 3,2 m
  • Tilting angle 155 °
  • Accessories holder FH